SOPROLEC InterpCNC V2 - 3 axes card - USB/RS485

Specifications :

Power :

• Power supply from 12 to 28VDC/150mA
• Via the USB port if the analog inputs/outputs are not used.

  
Specs of outputs:

• Outputs 1 to 3: 50V/50mA optocoupler, A common point.
• Outputs CK1 to CK3, D1 to D3: TTL output 5V/20mA max

Specs of inputs:

• Inputs 1 to 6: 0 to 32V max. High level from 3.5V. Programmable filter from 0 to 150ms.
• Inputs 7 to 10: 0 to 32V max. High level from 3.5V. Programmable filter from 0 to 150ms.
• Note: Inputs IN1 to IN10 are compatible with NPN or PNP type sensors (positive or negative logic)
• One TTL incremental encoder input or 2 fast counter inputs.
• ENABLE input: Emergency stop function. 0 to 32V max. High level from 3.5V.

Analog inputs/outputs:

• 2 analog inputs AI1 to AI2: 0 to 10V. 1M impedance, 10 bit resolution.
• 2 analog outputs AO1 and AO2: 0 to 10V. 10 bit resolution.

Communication interfaces :

• USB 2.0 High Speed,
• RS485 half duplex, MODBUS RTU protocol.
• DMX 512 on RS485 protocol

Performance:

• Frequency of motor control pulses: 200KHz
• 32 KB command buffer (i.e. up to 1500 movement commands)

Software compatibility:

• GALAAD,
• Mach3 and  Mach4 :
  Download the ICNC2 PlugIn for Mach3 : 
  
  Download the ICNC2 PlugIn for Mach4 : 
  
  
• MultiCN,
• Labview (VI delivered with the board for USB and Modbus)
• API communication USB également disponible.

Technical sheet:

• Voltage 12V à 28VDC
• Length 100mm
• Width 30mm
• Depth 90mm
• USB communication: Yes
• RS232 communication: No
• RS485 communication: Yes. MODBUS RTU protocol
• Incremental encoder input: 1
• Analog outputs: 2
• PLC functions: Yes
• Number of axes: 3
• Pulse frequency 200KHz
• Number of inputs: 10
• Number of outputs: 3
• Analog inputs: 2

Note: The torch height regulation functions for plasma cutting machines are only available on the InterpCNC V2 5 axis version.