Microstep driver with an integrated speed profile generator.
This driver is ideal for basic motion applications in velocity mode.
The typical use of this driver is to control the rotation of a stepper motor using on/off commands from manual switches or PLC outputs. The integrated potentiometers make it possible to adjust the speeds of rotation as well as the acceleration.
Electrical specs
|
Parameter |
Min |
Typical |
Max |
Unit |
|
Power voltage |
18 |
60 |
80 |
VDC |
|
Max pulse frequency |
0 |
- |
200 |
kHz |
|
Current for logic signals |
7 |
10 |
16 |
mA |
|
Insulation resistance |
500 |
- |
- |
MΩ |
Speed control
|
Parameters |
Specifications |
Dead zone |
Resolution |
Min |
Max |
|
|
Analog Input |
0-5V Speed Mode |
0-5 V |
10 mV |
10 mV |
0 Rev/s |
25 ± 0.5 Rev/s |
|
External POT Mode |
20 mV |
|||||
|
Accel / Decel / Ramp Potentiometer |
0-25 turns |
10 mV |
10 mV |
0.5 Rev/s2 |
250 ± 1 Rev/s2 |
|
|
LoSpeed Potentiometer |
0-25 turns |
10 mV |
10 mV |
0 Rev/s |
5 ± 0.01 Rev/s |
|
|
HiSpeed Potentiometer |
0-25 turns |
10 mV |
10 mV |
0 Rev/s |
25 ± 0.5 Rev/s |
Working conditions
|
Cooling |
Natural or forced |
|
|
Operating Environment |
Environment |
Avoid dust, oil fog and corrosive gases |
|
Storage Temperature |
-20 °C － 65 °C (-4°F － 149 °F ) |
|
|
Ambient Temperature |
0°C－ 50 °C (32 °F－ 122°F) |
|
|
Humidity |
40%RH － 90%RH |
|
|
Operating Temperature (Heat Sink) |
70 °C (158 °F) Max |
|
|
Vibration |
10-55Hz, 0.15mm/s |
|
|
Storage Temperature |
|
Operating modes :
Accessories
Specifications
| Brand | Leadshine |
| Axes | 1 Axe |
| Min. Voltage | 20 V |
| Max. Voltage | 80 V |
| Max. current | 5 A |
| Resolution setting | DIP-switches |
| Configurable | via RS232 cable |
| Weight | 280 gr |