CNC-PLC 5 axes SOPROLEC InterpCNC V2.2B USB/RS485 support DIN

Commande numérique - Automate programmable InterpCNC V2.2 - Interfaces : USB et RS485 protocole MODBUS
Carte 5 axes: 10 Sorties TTL Step/Direction
4 sorties relais + 8 sorties PNP. 16 entrées 24V
Analogique : 4 entrées analogiques 0/10V et 2 sorties analogiques 0/10V
Compatibilité logiciel : GALAAD
Montée sur support rail DIN

319,00 € HT 319.0 EUR 319,00 €

319,00 €

382,80 € 382,80 € TTC

  • Marque
  • Axes
  • Entrées
    • 16
  • Sorties
    • 12
  • Entrées analogiques
  • Sorties analogiques

Cette combinaison n'existe pas.

Product Documents

English setup manual ICNC V2.2
Manuel d'installation ICNC V2.2
USB Driver for Windows XP et Windows 7
Manuel de l'interpreteur Basic InterpCNC V2
Logiciel de diagnostic (TestCenter)
LabView (Modbus + USB)

Référence interne: ICNC2.2B-DIN

New 2022 version

More compact: 143mm*100mm.
With or without support for DIN rail, as desired.
Overall dimensions: 150mm*112mm .

The card has 5 axis command outputs that can be interpolated or independent.

Developed on the basis of a powerful 32-bit processor, the InterpCNC V2.2 offers ideal performance for digital control applications and also automation applications requiring economical axis control/command.

The InterpCNC V2.2 has also a powerful Basic language interpreter allowing the programming of embedded functions or the standalone management of axis control/command applications.
The Basic program is stored in Flash memory directly on the board and automatically executed on power-up.


The axis control interface in Step/Direction mode is compatible with the entire range of motorization offered by SOPROLEC (stepper motorization, brushless motorization).

Two communication interfaces are available:

  • USB for fast communication in CNC applications,
  • RS485 MODBUS RTU for industrial applications or DMX512.

Compatibility with the following digital control software:

  • LabView (using USB or RS485 MODBUS)
  • GALAAD (CAD/CAM Integrated Piloting Unit),
  • MULTI-CN CNC control solution with professional automation.


Specifications :

Power :

  • Requires power supply from 20 to 28VDC/250mA   

Specs of outputs:

  • Outputs 1 to 4: Dry contact relay 250V/10A
  • Outputs 5 to 12: Outputs 24V PNP 350mA (total outputs)
  • Outputs CK1 to CK5, D1 to D5: TTL output 5V/20mA max

Specs of inputs :

  • Inputs 1 to 16: 0 to 32V max. High level from 3.5V. 1.5KHz filter.
  • A TTL incremental encoder input or 2 fast counter inputs (connection of an MPG electronic handwheel).

Analog Inputs/Outputs:

  • 4 Analog inputs AI1 to AI4: 0 to 10V. 1M impedance, 10 bit resolution.
  • 2 analog outputs AO1 and AO2: 0 to 10V. 10 bit resolution.

Communications interfaces:

  • USB 2.0 High Speed,
  • RS485 half duplex, protocol MODBUS RTU
  • RS485 protocol DMX 512.

Performances :

  • Frequency of motor control pulses: 200KHz
  • 32 KB command buffer (i.e. up to 1500 movement commands)

Technical sheet:

  • 12 to 28V power voltage
  • 143 mm length
  • 100 mm width
  • USB communication
  • RS232 Communication: no
  • RS485 communication (Modbus RTU protocol)
  • Incremental encoder input: 1
  • Analog Outputs: 2 (0..10VDC)
  • PLC functions: Yes
  • Number of axes: 5
  • Pulse frequency 200KHz
  • Number of inputs 16
  • Number of outputs 12
  • Analog inputs 4 (0..10VDC)

The board comes with a 1.8m USB cord.

Device engineered and made in France by SOPROLEC.



Accessories

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

Spécifications

Marque SOPROLEC
Axes 5 Axes
Entrées 16
Sorties 12
Entrées analogiques 4
Sorties analogiques 2