SOPROLEC InterpCNC V2 - 3 axes card - USB/RS485

3 axis control module
PLC function
USB and RS485 communications

189.00 € Without Taxes 189.0 EUR 189.00 €

189.00 €

226.80 € 226.80 € with taxes

  • Brand
  • Axes
  • Inputs
    • 10
  • Outputs
    • 3
  • Analog inputs
  • Analog outputs

This combination does not exist.

Product Documents

Mach4plugin - guide de configuration FR.pdf
Mach4plugin - quick start instructions.pdf
Firmwares.zip
Test Center diagnose software
Interconnection CNC-IHM
LabView (Modbus + USB)
ICNC V2 avec Labview
Drivers
Notice (ICNC V2 + Protocole Modbus + Programmation Basic)

Internal Reference: ICNC2-DIN

Specifications :


Power :

  • Power supply from 12 to 28VDC/150mA
  • Via the USB port if the analog inputs/outputs are not used.

  
Specs of outputs:

  • Outputs 1 to 3: 50V/50mA optocoupler, A common point.
  • Outputs CK1 to CK3, D1 to D3: TTL output 5V/20mA max

Specs of inputs:

  • Inputs 1 to 6: 0 to 32V max. High level from 3.5V. Programmable filter from 0 to 150ms.
  • Inputs 7 to 10: 0 to 32V max. High level from 3.5V. Programmable filter from 0 to 150ms.
  • Note: Inputs IN1 to IN10 are compatible with NPN or PNP type sensors (positive or negative logic)
  • One TTL incremental encoder input or 2 fast counter inputs.
  • ENABLE input: Emergency stop function. 0 to 32V max. High level from 3.5V.



Analog inputs/outputs:

  • 2 analog inputs AI1 to AI2: 0 to 10V. 1M impedance, 10 bit resolution.
  • 2 analog outputs AO1 and AO2: 0 to 10V. 10 bit resolution.



Communication interfaces :

  • USB 2.0 High Speed,
  • RS485 half duplex, MODBUS RTU protocol.
  • DMX 512 on RS485 protocol



Performance:

  • Frequency of motor control pulses: 200KHz
  • 32 KB command buffer (i.e. up to 1500 movement commands)



Software compatibility:

  • GALAAD,
  • Mach3 and  Mach4 :
    Download the ICNC2 PlugIn for Mach3

    Download the ICNC2 PlugIn for Mach4

  • MultiCN,
  • Labview (VI delivered with the board for USB and Modbus)
  • API communication USB également disponible.


Technical sheet:

  • Voltage 12V à 28VDC
  • Length 100mm
  • Width 30mm
  • Depth 90mm
  • USB communication: Yes
  • RS232 communication: No
  • RS485 communication: Yes. MODBUS RTU protocol
  • Incremental encoder input: 1
  • Analog outputs: 2
  • PLC functions: Yes
  • Number of axes: 3
  • Pulse frequency 200KHz
  • Number of inputs: 10
  • Number of outputs: 3
  • Analog inputs: 2


Note: The torch height regulation functions for plasma cutting machines are only available on the InterpCNC V2 5 axis version.



Accessories

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

Specifications

Brand Soprolec
Axes 3 Axes
Inputs 10
Outputs 3
Analog inputs 2
Analog outputs 2
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.